The MTC-F Duplicators and Sanitizers combine the latest in technology and extreme efficiency in design to achieve data transfer speeds up to 15GB/min. The MTC-F Series lets you copy data between hard disks at lightning speeds, verify/compare data, test for bad sectors, and has multiple hard disk erasure functions. With the unique “Daisy Chain” technology, this machine can achieve high-speed, synchronous duplication with targets on multiple connected machines without any speed degradation

Features:

• Supports 2.5″, 3.5″ SATA HDD, SSD and IDE HDD via IDE_SATA convertor 
• Brand Unimportant: Master & target drives can be a different size, brand & model.
• Systems & files code mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4/LVM) and Mac (HFS, HFS+, HFSX.)
• Data Transfer Rate: Cloning speeds up to 15GB/min.
• Bad Sectors Handling: Auto skip up to 6000 error sectors on the HDD.
• Auto Power Control: HDD is only powered ON during operation.
• Modular Cable Design: When cables wear out, users can quickly swap them out, saving time and money.
• Log report management records all task details for enhanced production management.
• 4 Copy Modes
  • Quick Copy Mode: The duplicator automatically copies only the data area, and supports Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX).
  • Whole Media:: The duplicator copies from the initial sector to the end, bit by bit.
  • Device All Partitions: Copies or skips HPA, DCO, unknown partitions, modified formats
  • Device Percentage (%): Sets percentage of source capacity to copy.
• Compare function: This allows you to verify the copy you just made is an exact duplicate ensuring no loss of data.
• 4 Sanitization Functions
  • Full Erase: Erase all HDD Sectors.
  • DoD Erase: Complies with the U.S. Department of Defense’s standard of erasing (DoD 5220.22).
  • Secure Erase: Erase content to NIST SP 800-88r1 compliant standards.
  • US Army AR 380-19 Erase: Erase devices(s) complying with Army Regulation 380-19 by the US Army.
• Daisy Chain Technology: Achieve high-speed, synchronous duplication with targets on multiple connected machines without any speed degradation

U-Reach Data Solutions Inc. prides ourselves with complying with top data security standards and regulations. Using this machine will help your company comply with:

   * GDPR (General Data Protection Regulation)

   * GLBA (Gramm-Leach-Bliley Act)

   * HIPAA (Health Information Portability and Accountability Act)

   * PCI DSS 4.0 (Payment Card Industry Data Security Standard)

   * PIPEDA (Personal Information Protection and Electronic Documents Act)

4 Different Copy Modes

Sanitization Functions

Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards

Secure erase functions wipe drive contents within seconds

Verification of Data Integrity

Copies are straightforward, but it is imperative that the copied data is verified through a bit-by-bit process to ensure successful copies

Skipping Bad Sectors

End-users are given options to skip bad sectors from the source device. 

Daisy Chain Technology

Daisy-Chain Connector – Mini-SAS (SFF-8088)

Daisy-Chain technology – Patent No.: US 9,349,408 B2

Optional Adapters Supported

Supports all types of SATA interfaces via different adapters.  

Modular Cable Design

When cables wear out, users can quickly swap them out, saving time and money.     

Event Log report

U-Reach MTC1500F duplicators have a unique mechanism to prevent alteration of its Event Log Report.

It records the operation results and other information of each device completely. 

General

Model	MTC1500F
Target	15

Specification

Maximum Transfer Speed	15.0GB/min. *Actual performance is dependent on HDD transfer speeds*
Capacity	Supports the largest sized devices available on the market.
Operating Type	Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages	English, Japanese
LCD Display	Backlit Monochrome LCD Display
LEDs	3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail)
Control Panel	4 Push Buttons(▲, ▼, OK, ESC)

Features

Copy Modes	Quick Copy (Systems & Files Copy), All Partition Copy, Whole Device Copy, Percentage Copy
Compare Function	Bit-by-bit data comparison
Sanitization Modes	Quick Erase, Full Erase (NIST SP 800-88r1), Secure Erase, DoD erase and US Army AR 380-19 erase.
Daisy Chain Technology	Daisy-Chain technology (Connector: Mini-SAS (SFF-8088)) makes production more efficient as the number of connections increase (Patent No.: US 9,349,408 B2)

Special Features

Log Report Management	Records all task details in the log report management system for enhanced production management.
PC Monitoring	Real-Time status monitoring through PC

Compatibilities

Compatible Devices	2.5″/3.5” SATA HDDs and SSDs
Compatible Devices (with required adapter)	2.5″, 3.5” IDE HDD, mSATA SSD, 1.8″ SATA/SAS HDD and SSD with micro SATA, eSATA, iVDR
Supported Formats	Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4/LVM), and Mac (HFS, HFS+, HFSX). Whole Device Copy Function: All Formats, including proprietary formats. GPT, MBR, and Advanced Formats
Supported O/S	All (Windows, Mac, Linux, and other stand-alone systems)

Hardware specification

Power Supply	Universal Power: 115VAC or 230VAC, 50/60Hz
Working Temperature	0°C ~ 60°C (32°F ~ 140°F)
Storage Temperature	-20°C ~85°C (-4°F ~ 185°F)
Working Humidity	20% ~ 95%
Storage Humidity	5% ~ 95%
Product Dimensions	24 in x 14 in x 8.5 in
Weight (lbs)	20.6 lbs.
Certifications	FCC, CE, REACH, MIL-STD-810H, DEF STAN 00-35, ADISA, ICES-003
Compliance	MIL-STD-130N, NIST SP 800-88r1, ISO 27000

Title	MT/MTC Series IDE/SATA Duplicator and Sanitizers User Manual
Download

Q1. What is the difference between system and files copy and whole media copy modes?

High speed, data consistency, and valuable functions.

1. HDD duplicators support all brands of HDDs. These duplicators copies bit-by-bit at high speeds, which takes around 1~3 hours to finish a 1TB HDD. (Actual speeds varies on HDD and duplicator models).

2. HDD duplicators support “data-only quick copy.” Allowing users to save time and skipping empty HDD sectors.

3. Aside from using the copy function, additional features and functions are added; such as the erase function and DOD erase.

Q2. How long does it take for the HDD duplicators to finish duplicating 1TB?

1. Carry series: copy speeds up to 9GB/min. 1TB duplication takes around 2.5-3 hours.

2. Industrial IT/MT Standard Series : copy-speeds up to 9GB/min. 1TB duplication takes 2~2.5 hours. High-speed Series: copy speeds are up to 18GB/mins, 1TB duplication takes 1 hours

3. Daisy-Chain Super 1 Tower Series: copy speeds up-to 9GB/min. 1TB takes 2.5-3 hours.

Q3. What is the difference between the HDD duplicator and ghost software?

GHOST:

1. Installation of GHOST on the PC is required and can only use 2 HDDs at the same time.

2. The speed of the operation depends on the computer’s CPU, RAM, BUS, SATA/IDE, and HDD models.

HDD duplicators:

HDD duplicators can simultaneously back-up large-scales of HDDs without speed decline.

Q4. Can I duplicate HDDs that have different capacities?

Yes, you can copy HDDs with different capacities. But you should be aware of the copy mode you do.

1.If you choose to do the quick copy, the duplicator will analyze whether the data can or cannot be duplicated according to its capacity and location.

2.If you’re copying with the NTFS format, the capacity of the target HDD must be at least 1MB bigger than the source.

Q5. Can I copy SSD HDD ?

Yes. All HDD/SSD duplicator has support copy SSD.

Q6. Can I copy IDE HDD ?

Yes, all the IT series, ITS series, MT series, MTC series, MTS series, and carry mini series can support copying with a SATA-IDE converter.

Q7. Why did the copy fail?

There are a few possible reasons for the copy to fail.

1. Please check if the data capacity in the source HDD has exceeded the amount in the target HDD.

2. If you are copying NTFS, the capacity of the target HDD must be at least 1MB bigger than the source HDD.

3. If the copy stops or fails during the copying process, please check if there are bad sectors in the target or source HDD.

4. If you can’t find the reason, please record the operation process as detailed as possible in order to help us examine your issue. a. Briefly describe the process of how you operated the duplicator. b. Please have the model number and version available. Also please provide the HDD brand, capacity, data size, format, and partition of both the source and target HDD. c. Describe the problem. d. Please download the support form from the website, and we will help as soon as possible.

Q8. Why is the copying going slow?

There are few reasons that will cause the copying to go slow.

1. The speed limit of the HDD. You can view the speed limit by checking on the PC.

2. Please check if you placed the HDD horizontally or vertically. Due to the design of the HDD itself, any movement will slow the speed of the HDD’s reading or writing.

3. If you are copying multiple HDDs simultaneously, please check if the issue if it is occurring on a few fixed targets. It might be because the connector module has been damaged by usage. You can contact your local seller to change to a new connector module or mobile rack.

Q9. Can I copy encrypted data?

As there are many encryption methods, such as software or hardware encryptions, if you cannot tell which type of encryption is used, you may need actual testing to find out. The recommended testing steps are as follow:

Please note: Before starting the test, confirm that the capacity of the target drive is at least equal to the capacity of the source drive.

STEP 1. Perform the Data Area Copy on the Duplicator

There will be several situations to consider,

S1. A green light is shown, and the copied device can be used normally. (OK)

S2. A red light shown at the beginning of replication means the machine cannot detect the device. (FAIL)

S3. A green light is displayed, meaning the copy is finished, but the device cannot be used normally. (Go to STEP 2)

S4. A red light is displayed in the process of copying, or when the copy is nearly finished. (Go to STEP 2)

STEP 2. Perform the Whole Media Copy on the Duplicator

S1. It shows a green light, and the copied device can be used normally. (OK)

S2. It shows a green light, but the copied device cannot be used normally. (FAIL)

If the device cannot be normally employed after performing the Whole Media Copy, it means that the encryption method may be set to be available only for a specific device serial number or device model information. Hence, the device cannot be used even if it is copied.

Product Series	MTC Series
Model NO.	MTC1500F
Controller Version	HD4844SATA2
Latest BIOS Version	2.53.6
Latest Version Release Notes	2.53.6 1. Improvement: When the language is switched to Japanese, some functions still display English characters. Only the MIL area is modified. Since the Japanese modification of the standard version will affect other clients in Japan, this version has been readjusted to only modify the Japanese menu in the MIL area. 2. Improvement: The Chinese version has changed the name of the following functions from “Clear” to “Erase”. “4. Erase”, “6.5.2. Include the mother hard disk when erasing”, “6.5.3. How to erase the hard disk”, “6.7.4. The number of bad sectors allowed during erasure”, “6.7.6. Erase Clear HPA when erasing the hard drive.” 2.53.5 1. Newly added: Function “5.6. Copy RAID 1 Hard Drive” is a Chinese-only function. After the copy is completed, the two hard drives form a group, Ports 3 and 4 form a group, Ports 5 and 6 form a group, and Ports 7 and 8 form a group. 2. Added: function “7.5. Export System Info”, this function will only be displayed when the area is set to MIL
PC Link Software	Download

Note: To obtain the latest firmware, please gather your duplicator’s serial and model numbers and contact us here.

How to Update Firmware

Please note: updating from an extremely outdated firmware to the latest may cause unforeseen issues due to outdated components. If you have any product related questions, please contact us at info@ureach-usa.com.