The Mini M.2 series is a 1:1 affordable and portable line of standalone multi-interface drive duplicators. These portable cloning unit provides advanced features not seen in your typical entry-level duplicator including support for PCIe M.2 NVMe SSD, M.2 SATA, 2.5”/3.5” SATA SSD/HDD. In addition, the NVS200 supports mSATA and IDE drives and the NVS200USAS supports U.2, U.3 and SAS drives. All the Mini M.2 models come with an easy-to-use LCD interface with 4 button keypad, comprehensive wiping and cloning features.

The Mini M.2 series provides the ability to create a bit-for-bit copy or use our “smart data and file systems only” mode to copy only data areas for extremely efficient cloning. These versatile duplicators make it easy to accomplish all your cloning and wiping tasks including drive testing, software and O/S upgrades, back-ups, content/application distribution and new PC rollouts.

As an adopting member of the NVM Express® Association, we fully comply with all NVMe® standards and specifications. Our commitment ensures performance and reliability across all NVMe-based solutions.

Feature

• Operation Type – Standalone, FPGA based operation, not a computer based design
• Controller Design – Embedded controller is designed to support capacities over 18TB+. Constant improvement supports latest available devices on the market
• Bandwidth Performance – Speed transfers up to 24 GB per minute. All systems have dedicated bandwidth enabling high volume replications without speed degradation.
• Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX.)
• Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase + Compare.
• All models are open platform design and Supports M key and B+M key for all M.2 PCIe, M.2 SATA devices, SATA HDD/SSD devices. Additionally, NVS200 supports mSATA and 3.5″ IDE while NVS200USAS supports U.2, U.3 and SAS drives.
• Removable modular M.2 ports design effectively reduce downtime and is cost effective for long term ownership

High Compatibility

• Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
• Whole media (bit-for-bit) copy mode supports all system and proprietary formats.
• Supports all brands of standard drives.
• Designed to support hard drives larger than 18TB.
• Supports MBR and GPT partitioning.

Sanitization methods

• Quick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete.
• Full Erase: Erases the entire device
• DoD Erase: Complies with U.S. Department of Defense erasure standards
• Secure erase: A National Institute of Standards and Technology 800-88 accepted technique for properly purging hard drives. This method is supported by almost all modern drives.

Skipping Bad Sectors

End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.

4 Different Copy Modes

Sanitization Functions

Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards

Secure erase functions wipe drive contents within seconds

Verification of Data Integrity

Copies are straightforward, but it is imperative that the copied data is verified through a bit-by-bit process to ensure successful copies

Supported Device

Supports M.2 NVMe, M.2 SATA, SATA HDD/SSD, mSATA HDD/SSD, IDE HDD/SSD

Verification of Data Integrity

Compatible with all sizes of NVMe M.2 SSD. (Type 2280/2260/2242/2230/22100)

Easy Operation

Simple, easy operation for any function

4 Copy Modes

Crossover copies available

Please see an overview of U-Reach Mini M.2 Series vs U-Reach NV-BM Series below.

Features	U-Reach Mini Series M.2 NVMe/SATA/IDE 1-1 Duplicator	U-Reach M.2 PCIe NVMe NV-BM Series Duplicator (1-5, 1-10, 1-15, 1-20)
Virus Security	No virus and hacking infiltration	No virus and hacking infiltration
Firmware/Software Compatibility Updates	Proprietary coding with free lifetime firmware support	Proprietary coding with free lifetime firmware support
Dedicated Bandwidth Per Port	Yes, no speed degradation	Yes, no speed degradation
Simple Backlit LCD	Yes, built for longevity	Yes, built for longevity
Erase Functions	– Quick Erase – Full Erase (NIST SP 800-88r1) – DoD3 Pass (DoD 5220.22-M) – DoD3 Pass+Compare (DoD 5220.22-M) – Secure Erase	– Quick Erase – Full Erase (NIST SP 800-88r1) – DoD3 Pass (DoD 5220.22-M) – DoD3 Pass+Compare (DoD 5220.22-M) – Secure Erase
Removable Internal SSD	No	No
GOB Image Encapsulation	No	Yes
Standalone Design	Yes	Yes
FPGA	Yes	Yes
O/S	No	No
One Step Copy	Yes, without internal images (2-step copy)	Yes, without internal images (2-step copy)
Modular Sockets	Yes	Yes
Supports U.2 NVMe/SATA	No	Yes
Integration of both NVMe and SATA Protocols	Yes	Yes
Log Report Management	No	Yes
MIL-STD-810H Certified	Yes	Yes

General

Model	NVS200
Target	1

Specification

Maximum Transfer Speed	24.0GB/min. *Actual performance is dependent on HDD transfer speeds*
Capacity	Supports the largest sized devices available on the market.
Operating Type	Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages	English, Japanese
LCD Display	Backlit Monochrome LCD Display
LEDs	3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail)
Control Panel	4 Push Buttons(▲, ▼, OK, ESC)

Features

Copy Modes	Quick Copy (Systems & Files Copy), All Partition Copy, Whole Device Copy, Percentage Copy
Compare Function	Bit-by-bit data comparison
Sanitization Modes	Quick Erase, Full Erase, DoD Erase, Secure Erase, and more.

Compatibilities

Compatible Devices	NGFF (M.2): 2230, 2242, 2260, 2280, 22110, PCI-e SSD (full and low profiles)SATA HDD/SSD
Supported Formats	Quick Copy: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+,HFSX) Whole Device Copy: All Formats, including proprietary formats
Supported O/S	All (Windows, Mac, Linux, and other stand-alone systems)

Hardware specification

Power Supply	Universal Power: 115VAC or 230VAC, 50/60Hz
Working Temperature	0°C ~ 60°C (32°F ~ 140°F)
Storage Temperature	-20°C ~85°C (-4°F ~ 185°F)
Working Humidity	20% ~ 95%, non-condensing
Storage Humidity	5% to 95%, non-condensing
Product Dimensions	11.5 in. x 9 in. x 3 in.
Weight (lbs)	3.6 lbs.
Certifications	FCC, CE, REACH, ICES-003
Compliance	NIST SP 800-88r1, ISO 27000

Title	NVS200 PCIE SSD Duplicator User Manual
Download

Q1. What is the difference between system and files copy and whole media copy modes?

System and files copy will look for common formats such as Linux (ext2/ext3/ext4), Windows (NTSF, FAT16/32/64), or Mac (HFS, HFS+, HFSX) and copy only the data/format portions of the media. This is generally a faster copy mode.

Whole media copy will start at LBA 0 and copy until there are no more addresses to copy. Any area that doesn’t contain your data will also be copied.

Q2. When performing a BIOS update, a “No Update File” message appears on the screen.

1. Verify the BIOS file is unzipped.

2. Ensure that the update partition has an MBR partition table and is formatted in FAT32.

3. Ensure the BIOS file is stored in the root directory of the device without any folders.

4. Save the BIOS file to another device and verify the device is of good quality.

5. Redownload and save the BIOS file again. Temporarily disable any software utilities that may contribute to interference during the download process.

6. Please verify that the BIOS file corresponds to the product model requiring the update.

Q3. What causes immediate duplication failure after starting the copy process?

1. Please make sure that the source capacity is smaller and will not exceed that of the target device capacities.

2. When duplicating an NTFS formatted source device, the target device capacity must be at least 1MB greater than the source.

3. Please verify the source device utilizing a PC to determine errorless accessibilities.

Q4. Can it copy from a drive with a capacity of 500 GB to one of 250 GB?

Yes, but the data and formatting on 500 GB drive must be less than 250 GB. If you are using a GPT partition table, then the backup partitions will be stored at the end of the 500 GB drive. Use the settings option to disable copying the backup GPT partition. The backup will be restored upon the next reboot in a PC.

Q5. What is the internal SSD used for?

Users can create drive images either directly or by using the GOB software and then store them on this internal drive. From here, the images may be used as a source and all slots on top become eligible targets.

Q6. Why is my copy speed slower than the quoted speed?

The copy speed in the spec is the maximum possible speed. However, the machine can only copy as fast as the drives can read and write. Drives with large amounts of data may lose speed over the copy time due to heat buildup.

Q7. Can this machine copy SATA drives?

Yes, both NVMe and SATA protocols are supported. The machine inherently supports the M key and B+M key M.2 interfaces. However, the optional adapter, TB1589, adds support for the traditional SATA interface.

Product Series	NV-BM Mini Series
Model NO.	NVS200 NVS200USAS
Controller Version	PE5331
Latest BIOS Version	2.54.3
Latest Version Release Notes	2.54.3 Improvement: Resolved the bug that the duplicator did not recognize Crucial P3 Plus 500GB SSD devices. 2.53.6 Improvement: Some functions still display in English when the language is switched to Japanese

Note: To obtain the latest firmware, please gather your duplicator’s serial and model numbers and contact us here.

How to Update Firmware

Please note: updating from an extremely outdated firmware to the latest may cause unforeseen issues due to outdated components. If you have any product related questions, please contact us at info@ureach-usa.com.