About Us
Products
Support
Industries
Contact
News
Policies
   
 
    Accessories - HDD Duplicator
  SATA Cable 22pin (10cm)
P1023
 
   
 
SATA Cable 22pin (10cm) with power, Female to Male
 
 
         
  IT Series SATA Connector Module
P1025
 
   
 
U-Reach IT Series SATA Connector Module
 
 
         
  IDE to SATA DOM 42th pin with power adapter
TB1503
 
   
 
U-Reach IDE to SATA DOM 42th pin with power adapter
 
 
         
  IDE to SATA adapter
TB1529
 
   
 
IDE to SATA adapter
 
Overview
Retain IDE convert to SATA. Dual-interface adapters for platform HDD duplicator, connect SATA based platform HDD duplicator to transfer to IDE HDDs.
 
Appearance
 
Application
For MT HDD Duplicators or other platform HDD duplicators, the SATA interfaces connect to the duplicator interface and connect IDE HDD to the IDE port. The power connector attach to power supply on the HDD duplicator for each port.
 
Features

Retain IDE and convert to SATA
Compliant with Serial ATA specification
Supports 3.5-inch 40 Pin IDE hard drives
Supports SATA I, SATA II and SATA III (6Gbps)
Fully RoHS compliant

 
Specification
Connectors: IDE 3.5-inch 40 Pin female to SATA 22-pin female
Dimension: 60 x 48 x 16 mm
Power: One Molex 4 pin power cable to support SATA 12V/5V power from PC power supply
Transfer speed: 150Mbp/s
   
  Serial ATA 1.0 A specification compliant
  ATA/ATAPI PIO mode 0 to 4
  ATA/ATAPI Ultra DMA of transfer rate 16.7,25,33,48,66,100,133, and 150MB/s
  ATA/ATAPI Ultra DMA of transfer rate 16.7,25,33,48,66,100,133, and 150MB/s
 
         
  2.5" to 3.5" HDD Caddy
P1029
 
   
 
2.5" to 3.5" HDD Caddy
 
 
         
  12V, 12.5A Adapter
P1054
 
   
 
12V, 12.5A power adapter
 
 
         
  2.5" to 3.5" IDE HDD Convertor
P1037
 
   
 
Converts 2.5" hard drive to regular IDE hard drive adapter.
This adapter converts a 44 pin laptop hard drive to use like a regular 40 pin IDE hard drive.
 
 
         
  MicroSATA to SATA adapter
P1040
 
   
 
MicroSATA to SATA adapter
 
 
         
  mSATA to SATA adapter
TB1527
 
   
 
mSATA to SATA adapter
 
Overview
Retain mSATA convert to SATA. Converter board for mSATA to SATA interface for HDD platform duplicators or platform HDD duplicator.
 
Appearance
 
Application
Goblin Series HDD Duplicator CT Series HDD Duplicator
 
Legend Series HDD Duplicator Carry Series HDD Duplicator
 
SATA DOM Duplicator IT Series HDD Duplicator
 
 
Features
Retain mSATA convert to SATA
Supports SATA I, SATA II and SATA III
Fully RoHS compliant
Supports mSATA full size(50.8 x 29.85mm) and half size(26.8 x 29.85mm)
 
Specification
Connector: mSATA 22-pin female to SATA 22-pin male
Dimension: 60x96x0.8mm
 
         
  microSATA to mSATA Adapters
TB1599
 
   
 
microSATA to mSATA Adapters
 
 
         
  eSATA to SATA Cable
P1042
 
   
 
eSATA to SATA adapter
(for MT HDD Dupe)
 
Overview
Transfer eSATA to SATA interface on MT duplicators.
 
Appearance
 
Specification
Interface:SATA port, eSATA port
Adapter:Cable x 2
 
         
  SATA M.2 to SATA Adapter
P1050
 
   
 
M.2 (NGFF) to SATA Adapter
(For HDD duplicators)
 
Overview
Transfer M.2 (NGFF) to SATA on HDD duplicator, including SSD series, platform series, and portable series HDD duplicators.
 
Appearance
 
Application
Convert M.2 (NGFF) SSD to SATA HDD/SSD interface.
Compatible with all SATA HDD duplicators.
 
Specification
Connector : SATA port x1 , M.2 (NGFF) SSD port x 1
Design : Open-frame design, no driver, no installation kit
Compatible Model : Carry series, Goblin series, IT series, MT series, CT series, SSD series
Accessory : IT series cable, MT series cable
 
T/IT-H Series HDD Duplicator MT/MT-H Series HDD Duplicator
 
CT/CT-H Series HDD Duplicator Super Jet Series SSD/SSD Duplicator & Tester
 
         
  Cfast to SATA adapter
P1053
 
   
 
CFast card to SATA HDD Adapter
(For HDD duplicators)
 
Overview
Transfer CFast to SATA interface on HDD duplicator, including SSD series, platform series, and portable series HDD duplicators.
 
Appearance
 
Application
Convert CFast card to SATA HDD interface.
Compatible with all SATA HDD duplicators.
 
Specification
Connector : SATA port x1 , CFast socket x 1
Flash media : CFast card
Design : Open-frame design, no driver, no installation kit
Compatible Model : Carry series, Goblin series, IT series, MT series, CT series, SSD series, Tower series
Accessory : IT series cable, MT series cable
 
IT/IT-H Series HDD Duplicator MT/MT-H Series HDD Duplicator
 
CT Series HDD Duplicator SuperJet Series SSD/SSD Tester
 
Tower Series HDD Duplicator
(Additional 2.5” Rack required)
 
 
 
         
  CRU DX115 DC Frame Only
DX115
 
   
 
Built-in DevicesInterfaces/Ports
Removable SAS/SATA Drive Enclosure
4 x M3 Drive Mounting Screws for 2.5" Drives
4 x #6-32 Drive Mounting Screws for 3.5" Drives
4 x M3 Chassis Mounting Screws
1 x Power Adapter
FCC Part 15 Class B
CE CISPR B
EN55022
EN55024
Green Compliant YesGreen Compliance
Specification
Drive Interface: SAS
Product Type: Drive Bay Adapter
Manufacturer Part Number: 6602-6500-0500
Manufacturer Website Address: www.cru-dataport.com
Manufacturer: CRU Acquisitions Group, LLC
Product Model: CDX115 DC
Product Name: Removable SAS/SATA Drive Enclosure
Product Line: Data Express
Brand Name: CRU
Number of Total Expansion Bays: 1
Number of 5.25" Bays: No
Number of 2.5"/3.5" Bays: 1
Number of 1.8" Bays: No
Material: Steel
Cooling Fan: Yes
Limited Warranty: 5 Year
 
 
 
         
 
  Panasonic TB CF SATA Adapter (CF29 to 75)
TB1553
 
   
 
Panasonic TB CF SATA Adapter (CF29 to 75)
 
 
         
  MTS Series - SAS MT-SAS Module Cable
TB1534
 
   
 
U-Reach MTS Series - SAS MT-SAS Module Cable
 
 
         
  MT Series- SATA Cable 14 cm
TB1535
 
   
 
U-Reach MT Series- SATA Cable 14 cm
 
 
         
  ITS Series SAS Port Module
TB1533
 
   
 
U-Reach ITS Series SAS Port Module
 
 
         
  SATA DOM to SATA Adapter-Standard
 
   
Best Solution that Easily Latches on and Retains Fast Speed SATA DOM as SATA.
 
Features
Retain SATA DOM and convert to SATA
Supports SATA I, SATA II and SATA III (6Gbps)
SATA DOM can be the primary bootable device containing the OS and application
Fully RoHS compliant
 
 
         
 
  SATA DOM to SATA Adapter - Power in Pin 7
 
   
Best Solution that Easily Latches on and Retains Fast Speed SATA DOM as SATA.
 
Features
Retain SATA DOM and convert to SATA
7 pin female latch SATA connector support the solid and durable Insertion to main board SATA Host
Supports SATA I, SATA II and SATA III (6Gbps)
SATA DOM can be the primary bootable device containing the OS and application
Fully RoHS compliant
 
Specification
Connectors: SATA 7 pin female and SATA 22-pin male
Dimension: 47 x 30 x 1.6mm
Power: One Molex 4 pin power cable to support SATA 12V/5V power from PC power supply